m3caai@gmail.com

Publications

Peer-reviewed Articles (*Corresponding author)

  1. AS Tistomo, A Achmadi, MA Fajria, SNY Pakpahan, Arlan, MD Anastasya, KS Dewantara, M Azzumar, Y Prihhapso, G Ginanjar, S Viridi, MM Munir, S Suprijadi, “Development of A Simple 1-T Dew-Point Generator”, International Journal of Thermophysics Vol 45:126 (2024) 1-16 https://doi.org/10.1007/s10765-024-03420-5
  2. Indriyati, DFS Ramadhani, FA Permatasari, MM Munir, M Nasir, and F Iskandar, “Flexible Photothermal Membrane Based on PVA/Carbon Dot Hydrogel Films for High-Performance Interfacial Solar Evaporation”, ACS Appl. Polym. Mater., Vol 6 (2024) 6726–6736 https://doi.org/10.1021/acsapm.4c00996
  3. AI Kamil and MM Munir*, “Structure and morphology optimization of nanofiber membrane for the application of high-performance air filtration”, Powder Technology, Vol 430 (2023) 118978 https://doi.org/10.1016/j.powtec.2023.118978 50 days free accces
  4. AS Tistomo, A Achmadi, MA Fajria, S Viridi, MM Munir, S Suprijadi, “Modeling and simulation of dew point temperature generated by a bubble aerator”, Acta IMEKO, Vol 12 (2023) 1-6  https://doi.org/10.21014/actaimeko.v12i4.1568
  5. YN Hendri, Y Rati, AKE Auni, R Marlina, MM Munir, A Patah*, Y Darma*, “Controlled pyrolysis of Zn-based metal organic framework-derived ZnO/C for Rhodamine-B degradation”, Materials Today Communications, Vol 37, (2023) 107011 https://doi.org/10.1016/j.mtcomm.2023.107011
  6. M Adrian, ID Aditya, MM Munir*, “New Approach in Evaluating Mask Filtration Efficiency Using Low-Cost PM2.5 Sensor and Mobile Mannequin Method”, Atmospheric Pollution Research, Vol 14 (2023) 101840 https://doi.org/10.1016/j.apr.2023.101840 50 days free accces
  7. M Adrian, P Lestari, F Iskandar, MM Munir*, “The Impact of Public Activity Restriction during COVID-19 to Air Quality in Urban Area of Bandung Measured Using Mobile Monitoring”, Aerosol and Air Quality Research, Vol 23 (2023) 220215 https://doi.org/10.4209/aaqr.220215
  8. MM Munir*, M Adrian, C Saputra, P Lestari, “Utilizing Low-Cost Mobile Monitoring to Estimate the PM2.5 Inhaled Dose in Urban Environment”, Aerosol and Air Quality Research, Vol 22 (2022) 220079 https://doi.org/10.4209/aaqr.220079
  9. MM Munir*, M Burhanuddin, AI Kamil, “High-performance blow spun waste-acrylonitrile butadiene styrene (ABS) fibrous membrane for air filter”, Journal of Materials Research and Technology, Vol 18 (2022) 4564-4577 https://doi.org/10.1016/j.jmrt.2022.04.107 Free Access
  10. MM Munir*, M Adrian, M Burhanuddin, F Iskandar, “Fabrication and Structure Optimization of Expanded Polystyrene (EPS) Waste Fiber for High-Performance Air Filtration”, Powder Technology, Vol 402 (2022) 117357 https://doi.org/10.1016/j.powtec.2022.117357 Free Access
  11. MM Munir*, WS Mustika, C Saputra, M Adrian, A Suhendi, “Optimizing Singly-Charged Electrosprayed Particle Throughput of an Electrospray Aerosol Generator Utilizing a Corona-based Charger”, Aerosol Science and Technology, Vol 56 (2022)  281-294 https://doi.org/10.1080/02786826.2021.2016596 Free Access
  12. C Saputra, AI Kamil, MM Munir*, A Waris and Novitrian, “The performance of an electrical ionizer as a bipolar aerosol charger for charging ultrafine particles”, Aerosol Science and Technology, Vol 56 (2022) 117-133   https://doi.org/10.1080/02786826.2021.1976719 Free Access
  13. WS Mustika, DA Hapidin, C Saputra and MM Munir*, “Dual Needle Corona Discharge to Generate Stable Bipolar Ion for Neutralizing Electrosprayed Nanoparticles”, Advanced Powder Technology,  Vol 32 (2021) 166-174,  https://doi.org/10.1016/j.apt.2020.11.026
  14. E Yuliza, N Amalia, HD Rahmayanti, MM Munir, K Khairurrijal, M Abdullah, “How human age affects the signature’s curvature, density and amplitude to wavelength ratio and its potential application for countering document falsification”, Australian Journal of Forensic Sciences, Vol 53 (2021) 112-123   https://doi.org/10.1080/00450618.2019.1664633
  15. C Saputra, MM Munir*, A Waris, “Digital pulse analyzer for simultaneous measurement of pulse height, pulse width, and interval time on an optical particle counter”, Meas. Sci. Technol., Vol 31, (2020) 065901    https://doi.org/10.1088/1361-6501/ab7167
  16. G Prahasti, A Zulfi and MM Munir*, “Needleless electrospinning system with wire spinneret: An alternative way to control morphology, size, and productivity of nanofibers”, Nano Express,Vol 1 (2020), 010046   https://doi.org/10.1088/2632-959X/ab976a
  17. A Fauzi, DA Hapidin, MM Munir*, F Iskandar, and K Khairurrijal, “Superhydrophilic Bilayer Structure of Nylon 6 Nanofibers/Cellulose Membrane and Its Characterization as Potential Water Filtration Media”, RSC Advances, Vol 10 (2020), 17205 – 17216,    https://doi.org/10.1039/D0RA01077D
  18. YA Rezeki, DA Hapidin, H Rachmawati, MM Munir*, K Khairurrijal, “Formation of electrosprayed composite nanoparticles from polyvinylpyrrolidone/mangosteen pericarp extract”, Advanced Powder Technology, Vol 31 (2020), 1811-1824   https://doi.org/10.1016/j.apt.2020.02.016
  19. A Rajak, DA Hapidin, F Iskandar, MM Munir*, K Khairurrijal, “Electrospun nanofiber from various source of expanded polystyrene (EPS) waste and their characterization as potential air filter media”, Waste Management, Vol 103,(2020) 76-86   https://doi.org/10.1016/j.wasman.2019.12.017
  20. DA Hapidin, MM Munir*, Suprijadi, K Khairurrijal, “Development of a new personal air filter test system using a low-cost particulate matter (PM) sensor”, Aerosol Science and Technology, Vol 54, (2020) 203-216   https://doi.org/10.1080/02786826.2019.1678734
  21. A Rajak, DA Hapidin, F Iskandar, MM Munir*, K Khairurrijal, “Controlled morphology of electrospun nanofibers from waste expanded polystyrene for aerosol filtration”, Nanotechnology,  Vol 30 (42), (2019) 425602   https://doi.org/10.1088/1361-6528/ab2e3b
  22. D Mustikasari, YA Rezeki, MM Munir*, H Rachmawati, K Khairurrijal, “Turmeric extract-loaded polyvinylpyrrolidone spherical submicron particles produced using electrohydrodynamic atomization: their physico-chemical properties and antioxidant activity”, Materials Research Express, Vol 6 (8), (2019) 085415   https://doi.org/10.1088/2053-1591/ab272a
  23. RA Salam, MM Munir*, T Warsahemas, C Saputra, H Latief, K Khairurrijal, “A simple solar simulator with highly stable controlled irradiance for solar panel characterization”, Measurement and Control, Vol 52 (3-4), (2019) 159-168   https://doi.org/10.1177/0020294019827327
  24. A Zulfi, DA Hapidin, MM Munir*, F Iskandar, K Khairurrijal, “The synthesis of nanofiber membranes from acrylonitrile butadiene styrene (ABS) waste using electrospinning for use as air filtration media”, RSC Advances, Vol 9 (53),(2019) 30741-30751   https://doi.org/10.1039/C9RA04877D
  25. D Edikresnha, T Suciati, MM Munir*, K Khairurrijal, “Polyvinylpyrrolidone/cellulose acetate electrospun composite nanofibres loaded by glycerine and garlic extract with in vitro antibacterial activity and release behaviour test”, RSC advances, Vol 9 (45),(2019) 26351-26363   https://doi.org/10.1039/C9RA04072B
  26. DA Hapidin, C Saputra, DS Maulana, MM Munir*, K Khairurrijal, “Aerosol chamber characterization for commercial particulate matter (PM) sensor evaluation”, Aerosol and Air Quality Research,  Vol 19 (1),(2019) 181-194   DOI: 10.4209/aaqr.2017.12.0611
  27. E Yuliza, N Amalia, HD Rahmayanti, R Munir, MM Munir, K Khairurrijal, M Abdullah, “Stability of granular tunnel”, Granular Matter, Vol 20 (2018), 75   DOI: 10.1007/s10035-018-0847-5
  28. A Amri, A Fadli, ZT Jiang, CY Yin, MM Rahman, H Widjaja, S Herman, SR Yenti, MM Munir, G Priyotomo, M Iqbal, N Frimayanti, “Surface structural and solar absorptance features of nitrate-based copper-cobalt oxides composite coatings: Experimental studies and molecular dynamic simulation”, Ceramics International Vol 44, (2018) 15274-15280   DOI: 10.1016/j.ceramint.2018.05.171
  29. E Yuliza, N Amalia, HD Rahmayanti, R Munir, MM Munir, K Khairurrijal, M Abdullah, “Dynamics of coupled cylinders containing identical granules as potential new “granular braking” system”, Powder Technology, Vol 336, (2018) 506-515   DOI: 10.1016/j.powtec.2018.06.024
  30. I. Sriyanti, D. Edikresnha, A. Rahma, M.M. Munir, H. Rachmawati, K. Khairurrijal, “Mangosteen pericarp extract embedded in electrospun PVP nanofiber mats: physicochemical properties and release mechanism of alpha-mangostin”, International Journal of Nanomedicine, Vol.13 (2018), 4927-4941    DOI: 10.2147/IJN.S167670
  31. A. Sawitri, M. M. Munir*, D. Edikresnha, A. Sandi, A. Fauzi, A. Rajak, D. Natalia, and K. Khairurrijal, “An Investigation on Bilayer Structures of Electrospun Polyacrylonitrile Nanofibrous Membrane and Cellulose Membrane Used as Filtration Media for Apple Juice Clarification”, Materials Research Express, Vol. 5 (2018), 054003.    DOI: 10.1088/2053-1591/aac316
  32.  P. Pusporini, D. Edikresnha, I. Sriyanti, T. Suciati, M. M. Munir*, and K. Khairurrijal, “Electrospun Polyvinylpyrrolidone (PVP)/Green Tea Extract Composite Nanofiber Mats and Their Antioxidant Activities”, Materials Research Express, Vol. 5 (2018), 054001.   DOI: 10.1088/2053-1591/aac1e6
  33. A. Zulfi, M. M. Munir*, D. A. Hapidin, A. Rajak, D. Edikresnha, F. Iskandar, and K. Khairurrijal, “Air Filtration Media from Electrospun Waste High-impact Polystyrene Fiber Membrane”, Materials Research Express, Vol. 5 (2018), 035049.   DOI: 10.1088/2053-1591/aab6ef
  34. I. Sriyanti, D. Edikresnha, A. Rahma, M. M. Munir*, H. Rachmawati, and K. Khairurrijal, “Correlation between Structures and Antioxidant Activities of Polyvinylpyrrolidone/Garcinia mangostana L. Extract Composite Nanofiber Mats Prepared Using Electrospinning”, Journal of Nanomaterials, Vol. 2017 (2017), 9687896.   DOI: 10.1155/2017/9687896
  35. A. Amri, Z.T. Jiang, C.Y. Yin, A. Fadli, M.M. Rahman, S. Bahri, H. Widjaja, N. Mondinos, T. Herawan, M.M Munir, G. Priyotomo,” Structural, optical, and mechanical properties of cobalt copper oxide coatings synthesized from low concentrations of sol–gel process”, Physica Status Solidi (a), Vol. 213 (2016), pp. 3205–3213.   DOI: 10.1002/pssa.201600207
  36. A. Rahma, M. M. Munir, Khairurrijal, A. Prasetyo, V. Suendo, H. Rachmawati, “Intermolecular Interactions and the Release Pattern of Electrospun Curcumin-Polyvinyl(pyrrolidone) Fiber”, Biological and Pharmaceutical Bulletin, Vol. 39 (2016), pp. 163-173.    https://doi.org/10.1248/bpb.b15-00391
  37. Asep Suhendi, Asep Bayu Nandiyanto, Muhammad Miftahul Munir, Takashi Ogi, Kikuo Okuyama, “Preparation of agglomeration-free spherical hollow silica particles using an electrospray method with colloidal templating”, Materials Letters, 106 (2013) 432-435   https://doi.org/10.1016/j.matlet.2013.05.056
  38. Asep Suhendi, Asep Bayu Dani Nandiyanto, Muhammad Miftahul Munir, Takashi Ogi, Leon Gradon, and Kikuo Okuyama, “Self-Assembly of Colloidal Nanoparticles Inside Charged Droplets during Spray-Drying in the Fabrication of Nanostructured Particles”, Langmuir, 29 (2013) 13152–13161 (IF 2012: 4.187)   DOI: 10.1021/la403127e
  39. Asep Suhendi, Muhammad Miftahul Munir,  Adi Bagus Suryamas, Asep Bayu Dani Nandiyanto, Takashi Ogi, and Kikuo Okuyama,Control of cone-jet geometry during electrospray by an electric current, Advanced Powder Technology, 24 (2013) 532 (IF 2011: 1.612)   DOI: 10.1016/j.apt.2012.10.009
  40. Muhammad Miftahul Munir, Asep Suhendi, Takashi Ogi, Ferry Iskandar and Kikuo Okuyama, “Ion-induced nucleation rate measurement in SO2/H2O/N2 gas mixture by soft X-ray ionization at various pressures and temperatures”,  Advanced Powder Technology, 24 (2013) 143   (IF 2011: 1.612)   DOI: 10.1016/j.apt.2012.04.002
  41. Takashi Ogi, Y. Kisakibaru, Yutaka Kaihatsu, Wei-Ning Wang, Muhammad Miftahul Munir, and Kikuo Okuyama, “Preparation and characterization of boron oxide based red-emitting phosphors using Eu, Al and Ca additives”,  Materials Chemistry and Physics 133 (2012) 392 (IF 2010: 2.353)     DOI: 10.1016/j.matchemphys.2012.01.047
  42. Adi Bagus Suryamas, Muhammad Miftahul Munir, Takashi Ogi, Khairurrijal and Kikuo Okuyama, “Intense green and yellow emissions from electrospun BCNO phosphor nanofibers”, Journal of Material Chemistry 21 (2011) 12629   (IF 2010: 5.099)   DOI: 10.1039/c1jm12654g
  43. Muhammad Miftahul Munir, Asep Suhendi, Takashi Ogi, Ferry Iskandar and Kikuo Okuyama, “Experimental evaluation of the pressure and temperature dependence of ion-induced nucleation”,  Journal of Chemical Physics 133 (2010) 124315  (IF 2011: 3.333)   DOI: 10.1063/1.3490354
  44. Adi Bagus Suryamas, Muhammad Miftahul Munir, Takashi Ogi, Christopher J. Hogan and Kikuo Okuyama, “Photoluminescent ZrO2:Eu3+ Nanofibers Prepared via Electrospinning”, Japanese Journal of Applied Physics (2010) 49 (2010) 115003   (IF 2010: 1.018)  DOI: 10.1143/JJAP.49.115003 
  45. Ferry Iskandar, Adi Bagus Suryamas, Masaaki Kawabe, Muhammad Miftahul Munir, Kikuo Okuyama, Takashi Tarao, and Takashi Nishitani, Indium Tin Oxide Nanofiber Film Electrode for High Performance Dye Sensitized Solar Cells,  Japanese Journal of Applied Physics 49 (2010) 010213  (IF 2010: 1.018)   DOI: 10.1143/JJAP.49.010213
  46. Muhammad Miftahul Munir, Adi Bagus Suryamas, Ferry Iskandar and Kikuo Okuyama, “Scaling law on particle to fiber formation during electrospinning”, Polymer, 50 (2009) 4935  (IF 2010: 3.828)  DOI: 10.1016/j.polymer.2009.08.011
  47. Muhammad Miftahul Munir, Ferry Iskandar, Khairurrijal and Kikuo Okuyama, “High performance electrospinning system for fabricating highly uniform polymer nanofibers”,  Review of Scientific Instruments 80 (2009) 026106  (IF 2010: 1.598),   DOI: 10.1063/1.3079688   Top 20 Most Downloaded Articles March 2009   
  48. Adi Bagus Suryamas, Muhammad Miftahul Munir, Ferry Iskandar and Kikuo Okuyama, “Photoluminescent and crystalline properties of Y3−xAl5O12:Cex3+ phosphor nanofibers prepared by electrospinning”,  Journal of Applied Physics 105 (2009) 064311  (IF 2010: 2.064)   DOI: 10.1063/1.3095483
  49. Muhammad Miftahul Munir, Hendri Widiyandari, Ferry Iskandar and Kikuo Okuyama, “Patterned indium tin oxide nanofiber films and their electrical and optical performance”,  Nanotechnology, 19 (2008) 375601  (IF 2011: 3.979)   DOI: 10.1088/0957-4484/19/37/375601
  50. Hendri Widiyandari, Muhammad Miftahul Munir, Ferry Iskandar and Kikuo Okuyama, “Controlled Morphology of Titania Anatase-supported Chromia Nano-Fibers”, Materials Chemistry and Physics 116 (2009) 169  (IF 2010: 2.353)   DOI: 10.1016/j.matchemphys.2009.03.014
  51. Muhammad Miftahul Munir, Ferry Iskandar, Ki Myoung Yun, Kikuo Okuyama and Mikrajuddin Abdullah, “Optical and electrical properties of indium tin oxide nanofibers prepared by electrospinning”, Nanotechnology, 19 (2008) 145603  (IF 2011: 3.979)   DOI: 10.1088/0957-4484/19/14/145603
  52. Muhammad Miftahul Munir, Ferry Iskandar, Khairurrijal and Kikuo Okuyama, “A constant-current electrospinning system for production of high quality nanofibers”, Review of Scientific Instruments 79 (2008) 093904  (IF 2010: 1.598)   DOI: 10.1063/1.2981699
  53. Muhammad Miftahul Munir, Ki Myoung Yun, Akihiro Yabuki, Ferry Iskandar and Kikuo Okuyama, “Heating Profile Effect on Morphology, Crystallinity and Photoluminescent Properties of Y2O3:Eu3+ Phosphor Nanofibers Prepared Using an Electrospinning Method”,  Japanese Journal of Applied Physics 46 (2007) 6705  (IF 2010: 1.018)     DOI: 10.1143/JJAP.46.6705
  54. Khairurrijal, Muhammad M. Munir, Asep Suhendi, Hendrayana Thaha and Maman Budiman, “An AT89S52 microcontroller-based single board computer for teaching an instrumentation system course”,  Computer Applications in Engineering Education 15 (2007) 166  (IF 2011: 0.333)   DOI: 10.1002/cae.20107
  55. Khairurrijal, Mikrajuddin Abdullah, Asep Suhendi, Muhammad M. Munir and Arif Surachman, “A simple microcontroller-based current electrometer made from LOG112 and C8051F006 for measuring current in metal-oxide-semiconductor devices”,  Measurement Science and Technology 18 (2007) 3019  (IF 2011: 1.494)    DOI: 10.1088/0957-0233/18/9/037
CAAI
Theme by Grace Themes